Home > Pressure Pumps > ANNOVI REVERBERI > RK Stainless Steel Series >

AR Annovi Reverberi Pressure Washer Pump RKA-SS3.6G12N
AR Annovi Reverberi Pressure Washer Pump RKA-SS3.6G12N
AR Annovi Reverberi Pressure Washer Pump RKA-SS3.6G12N

Annovi Reverberi Pressure Washer Pump
List Price: $2,950.00
Our Price: $1,692.04
SHIPPING: Item Ships in 1 to 7 Days

Availability:: In Stock
Product Code: RKA-SS3.6G12N*

Description Technical Specifications Recommended Accessories / Additional Info
AR Annovi Reverberi Pressure Washer Pump RKA-SS3.6G12N 3.6 GPM @ 1500 PSI.

In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi RKA-SS3.6G12N pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. RKA-SS3.6G12N S.S. Series feature a SAE 316 stainless steel manifold this is totally corrosion resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anti-corrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack under extreme variable temperature conditions.
  • Manifold:
  • - 316L - Stainless Steel Block Style: Strength and no porosity = long life.
  • - Inlet and Discharge Ports: 1/2” inlet and 3/8” discharge.
  • - Offset Discharge Ports: High efficiency, smooth flow
  • - Bolts: 8 Bolts, 6mm, stainless steel.
  • Valves:
  • - Ultra Form Cages: Durable, strength, and long life.
  • - Poppets, Seat and Spring: 316 series stainless steel.
  • - Valve Caps: Machined 316L series stainless steel.
  • Packing and Plungers:
  • - High Pressure Packing: “V” style (D-1) Viton (cotton duct weave base) strong and tightens under load.
  • - Low Pressure Seals: “U” cup double lip Viton, good positive seal.
  • - Support and Guides: Machined stainless steel, 2-piece construction and special back-up ring to assure proper plunger alignment, maximize packing and seal life.
  • - Plungers: Special aluminum oxide blend, solid ceramic long life, strong and durable ultra thick design.
  • Bearings: Premium over sized taper for maximum life and load disbursement.
  • Bearings Supports: Precision die-cast and machined to assure concentricity and alignment.
  • Crankcase: Precision die-cast, large cooling fins and covered with a special anti-corrosion finish.
  • Rear Cover: Precision die-cast, O-Ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen). This is an “AR” original. Oil drain plug.
  • Plunger Rods: Stainless steel construction for strength, back-up and O-ring plunger sealing system. Special acorn style retaining nuts and SST slingers.
  • Rod Pins: Precision ground and hardened steel, over sized for load disbursement.
  • Connection Rods: 1-piece special alloy bronze for higher pressures, over sized for maximum strength, load disbursement, and life. Heavy pin area construction.
  • Crankshaft: Forged, precision ground and hardened for extremely long life and durability. Available in 24mm solid shaft, 5/8” and 1-1/8” hollow shafts, hydraulic motor and gearbox drives. Shaft key set screws are standard on high-speed version for long shaft life.
  • Oil Seals and O-Rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-Rings have stainless steel garder springs for assure constant tension on the sealing surface.
  • Oil Drains: Quantity of 2. One in the rear cover and one in the bottom of the crankcase.
  • Oil Capacity: 15 oz.
  • Oil Sight Glasses: Rear cover and non-drive side bearing housing.
  • Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
  • Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
  • Hot Water: High temperature kits are available to 180°F.
  • Wet End Repair: Very simple no special tools are required.
  • Mounting Flanges: Multiple flanges are available.
  • Buna-N: Elastomers available

Accessories for this product...
Our Price: $7.90

AR20400 Unloader from Annovi Reverberi
Our Price: $96.42

AR20400 Unloader from Annovi Reverberi
Our Price: $40.23

5,000 PSI Max Pressure Gauge Kit

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pressure Pumps > ANNOVI REVERBERI > RK Stainless Steel Series
Pressure Pumps