Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

MTM Hydro's PF22.2 Bottle Caps keep your excess chemical safe and airlocked for the next cleaning! These bottle caps are imported from Italy and have been manufactured with the precise threads required to maintain a water tight seal for your favorite liquids.

As of July 15th, 2020 all versions of PF22.2 foam cannons and Magnum kits will have caps included in the box.

Caps are currently included in the 3-pack and 5-pack of bottles.

Bearings and Bushings are installed on our Foam Filled or Pneumatic Tires.

We have setup several Tires as stocked items with bearings or bushings already installed for your convenience. Before purchasing, note the following specifications to make your choice:

• Foam Filled or Pneumatic
• Metal Ball Bearing or Nylon Bushing
• 5/8"", 3/4"", or Bare (no bearing/bushing)

Bearings and Bushings are installed on our Foam Filled or Pneumatic Tires.

We have setup several Tires as stocked items with bearings or bushings already installed for your convenience. Before purchasing, note the following specifications to make your choice:

• Foam Filled or Pneumatic
• Metal Ball Bearing or Nylon Bushing
• 5/8"", 3/4"", or Bare (no bearing/bushing)

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be back ordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availability. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

MTM cap screws are now manufactured in stainless instead of black powder coated steel. These will be included in the production of all new PF22 foamer bodies beginning around June of 2020, although, only the black powder coated versions will be sold until then.

Purchase this stainless cap screw for your PF22 to be ahead of the curve and avoid corrosion.

Veloci's Aftermarket Replacement parts for the Honda GX series of small engines, have a proven track record for excellent quality and fitment since their introduction in 2008. We did our homework to provide you with a hand selected, premium, aftermarket part that is of OEM quality. These aftermarket engine parts fit the Honda GX Series, only.

When selecting your replacement engine part be sure to confirm that it is a GX (Contractor Series) and falls within the sizing of a 120-610.

Veloci's Replacement Heater Parts are only meant to fit MTM Heat and Veloci branded heaters. These parts are shipped directly from our Italian Heater Manufacturer and we maintain a steady supply year-round. These are not heavily stocked items and may occasionally be backordered for 30-60 days depending upon availability.

This Particular item is Non-stock and subject limitations on availabilty. Minimum order Lead time is 30 days and may be as much as 90 days if they are not in stock at the factory.

Always refer to the Exploded View listing by heater model when ordering these items as they are, often, Specific to each machine despite have similar Specs and Descriptions

MTM Hydro's Premium Teflon Tape is a common household item for most Do-it-Yourself'ers. With 40 feet in length, this tape will last quite while as you replace old fittings and wrap pressurized threads. Any pressurized threads should receive a joint sealant of some kind whether you choose Teflon Tape or a joint compound like Thread Lock. To properly install Teflon tape, hold the item with threads in your left hand and face the threads toward you. Begin wrapping clockwise for the recommended number of wraps. By wrapping the Male threads clockwise, you will effectively tighten them creating a better seal when installed into opposing Female threads. Always re-wrap threads when installing/uninstalling your Pressure Washing accesories.

For NPT threads, MTM Hydro recommends 4 wraps of Teflon Tape. For BSP threads, MTM Hydro Recommends 6-7 wraps of Teflon Tape.