Home > Pressure Pumps > ANNOVI REVERBERI > XM / SXM Series Pumps >

Annovi Reverberi Pump - XMASS2.5G15E-F33
AR Annovi Reverberi Pressure Washer Pump XMASS2.5G15E-F33
Pump: 2.5/2000 1750RPM
 
Alternative Views:


Annovi Reverberi Pressure Washer Pump
List Price: $2,950.88
Our Price: $1,720.66
SHIPPING: Item Ships in 1 to 7 Days


Availability:: In Stock
Product Code: XMASS2.5G15E-F33
Qty:

Description Technical Specifications Recommended Accessories / Additional Info
 
In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi XMASS2.5G15E-F33 pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. S.S. Series XMASS2.5G15E-F33 feature a SAE 316 stainless steel manifold this is totally corrosion-resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anticorrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack under extreme variable temperature conditions.
Features
  • Manifold:
  • - 316L - Stainless Steel Block Style: Strength and no porposity = long life.
  • - Inlet and Discharge Ports: 1/2” inlet and 3/8” discharge.
  • - Offset Discharge Ports: High efficiency, smooth flow
  • - Bolts: 8 Bolts, 6mm, stainless steel.
  • Valves:
  • - Ultra Form Cages: Durable, strength, and long life.
  • - Poppets, Seat and Spring: 316 series stainless steel.
  • - Valve Caps: Machined 316L.
  • Packing and Plungers:
  • - High Pressure Packing: “V” style (D-1) Viton (cotton duct weave base) strong and tightens under load.
  • - Low Pressure Seals: “U” cup double lip Viton, good positive seal.
  • - Support and Guides: Machined stainless steel, 2-piece construction and back-up ring to assure proper plunger alignment, maximize packing and seal life.
  • - Plungers: Special aluminum oxide blend, solid ceramic long life, strong and durable.
  • Bearings: Oversized for maximum life and load dispercement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rodsand crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
  • Crankcase: Precision die-cast, large cooling fins and covered with a special anti-corrosion finish.
  • Rear Cover: Precision die-cast, O-Ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen). This is an “AR” original. Oil drain plug.
  • Plunger Rods: Stainless steel construction for strength, back-up and O-ring plunger sealing system with SST slingers.
  • Rod Pins: Precision ground and hardened steel, oversized for load dispersement.
  • Connection Rods: 1-piece special allow bronze for higher pressures, oversized for maximum strength, load dispersement, and life. Heavy pin area construction.
  • Crankshaft: Forged, precision ground and hardened for extremely long life and durability. Available in 5/8” hollow shafts drive. Shaft key set screws are standard on high-speed version for long shaft life. Mounting flange is 56-C face.
  • Oil Seals and O-Rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
  • Oil Drains: Two (2). One in the rear cover and one in the bottom of crankcase
  • Oil Capacity: 14 oz.
  • Dyno Proven: All pumps are dyno tested to assure the theroretical design meets the actual design.
  • Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
  • Hot Water: High temperature kits are available to 180°F.
  • Wet End Repair: Very simple no special tools are required.
  • Two Oil Drain Plugs: Rear cover and crankcase bottom.
  • Mounting Flanges: Multiple flanges are available.
  • Mounting Bolt Pattern: On top and bottom of the crankcase for shaft reversal.
  • Buna-N: Elastomers available.

Accessories for this product...
Pressure Washer Repair Part - BEIG-85.305.001
Our Price: $40.23

Add
5,000 PSI Max Pressure Gauge Kit
1/2" PUMP GUARD - THERMAL RELIEF
Our Price: $8.08

Add
1/2" PUMP GUARD
Annovi Reverberi Pumps - AR21039
Our Price: $106.06

Add
Annovi Reverberi Pumps - AR21039

Share your knowledge of this product with other customers... Be the first to write a review