Home > Pressure Pumps > Replacement Pumps > Electric Motors > 5/8" Shaft > 2 HP >

Annovi Reverberi Pump - XJV2G15E-F8
AR Annovi Reverberi Pressure Washer Pump XJV2G15E-F8
AR Annovi Reverberi Pressure Washer Pump XJV2G15E-F8


 
Alternative Views:


Annovi Reverberi Pressure Washer Pump
List Price: $500.00
Our Price: $259.90
SHIPPING: Item Ships in 1 to 7 Days

Availability:: In Stock
Product Code: XJV2G15E-F8
Qty:

Description Technical Specifications Recommended Accessories / Additional Info
 
XJV2G15E-F8 AR (Annovi Reverberi) Pump 2 GPM @ 1450 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.

Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140 F, Inlet Thread = 1/2M, Discharge Thread = 3/8M

SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.

This AR XJV2G15E-F8 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4 shaft 3.5 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJV2G15E-F8 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
Features
  • Manifold:
  • - Forged Brass: Strength and no porosity long life. Higher hydrostatic pressures safety.
  • - Unloader: Built in to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
  • - Bolts: Three bolts, 10mm, grade 8.8.
  • Valves:
  • - Ultra Form Cages: Durable, strong, and long life. Unique inlet valve configuration: the valve cage incorporates the high pressure packing head ring.
  • - Poppets, Seat and Spring: 303 and 400 series stainless steel.
  • - Valve Caps: Machined brass for greater strength.
  • Packing and Plungers:
  • - High Pressure Packing: V style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. Continuously lubricating for extended life, self lubricating packing/Plunger guide support ring.
  • - Low-Pressure Seals: U cup double lip Buna-N for a good positive seat.
  • - Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment, maximize packing and seal life.
  • - Plungers: Coated ceramic stainless steel, strong and durable. The pump includes a plunger shoe to distribute the additional plunger load.
  • Bearings: Angular contact ball bearing stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assures long radial plate life. All of the thrust plates are made of heat treated hardened steel for extended life.
  • Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs.
  • Rear Cover: Precision die-cast, O-ring sealed. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
  • Crankshaft/Wobble Plate: Precision die-cast to assure proper stroke, duration and alignment.
  • Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
  • Oil Capacity: 4.5 oz.
  • Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
  • Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
  • Wet End Repair: Very simple no special tools required.
  • Mounting Flanges: Gasoline SAE J609a flange. Refer to breakdown.
  • Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

Accessories for this product...
1/2" PUMP GUARD - THERMAL RELIEF
Our Price: $7.90

Add
1/2" PUMP GUARD
Annovi Reverberi Accessory - AR21039
Our Price: $84.03

Add
Annovi Reverberi Accessory - AR21039
5000 PSI PRESSURE GAUGE KIT
Our Price: $26.15

Add
5,000 PSI Max Pressure Gauge Kit

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pressure Pumps > Replacement Pumps > Electric Motors > 5/8" Shaft > 2 HP
Pressure Pumps > ANNOVI REVERBERI > XJ Series Pumps
Pressure Pumps > ANNOVI REVERBERI
Pressure Pumps > Replacement Pumps > Electric Motors > 5/8" Shaft
Pressure Pumps
Pressure Pumps > Replacement Pumps > Electric Motors
Pressure Pumps > Replacement Pumps