|
|
|
|
|
|
|
|
|
|
|
|
|
|
GPM: 2 RPM: 3400 PSI: 1900 Shaft Size & Type: 7/8″ Hollow Shaft
|
RMW2.2G24-EZ AR Annovi Reverberi Pressure Washer Pump with ez start valves. 2.2 GPM at 2400 PSI.
|
SRMW2.2G26-EZ pump from Annovi Reverberi. The SRMW2.2G26-EZ is rated 2.2 GPM at 2600 PSI
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2600PSI, 2.2GPM Annovi Reverberi Direct Drive Pump (Back Mount)
SKU: SRMW2.2G26-EZ-SX
Brand: Annovi Reverberi - AR North America
|
AR / Annovi Reverberi Pump SRMW2.4G28-EZ-SX is one of the most popular replacement pressure washer pumps on the market today for most pressure washers. THIS IS A REAR MOUNT PUMP.
|
6511.0012.00 - has a description of PUMP VRX 2017 V, ES L46
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6511.0023.00 - has a description of PUMP VRX 2017 V SAE/D L80 AL
|
Annovi Reverberi Pressure Washer Pump RMW2.5G28DF7EZ-TRV
|
RMV2G25D pump from Annovi Reverberi. The RMV2G25D has a rating of 2 GPM at 2500 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RMW2G25D Pump from Annovi Reverberi. The RMW2G25D Pump is rated 2 GPM at 2500 PSI.
|
RMW2.5G25D pump from Annovi Reverberi. The RMW2.5G25D pump is rated 2.5 GPM at 2500 PSI.
|
RMW2.5G28-EZ-SX pump from Annovi Reverberi. This RMW2.5G28-EZ-SX is rated 2.5 GPM at 2800 PSI. This pump is a direct drive, vertical pump that mounts to the rear of your pressure washers engine. It connects via a 7/8" straight shaft to your machine.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AR Annovi Reverberi Pressure Washer Pump RMW2.5G28-EZ, 2800PSI, 2.5GPM Annovi Reverberi Direct Drive Pump (Front Mount)
SKU: RMW2.5G28-EZ
Brand: Annovi Reverberi - AR North America
We do not have any mfg cross reference information available. However, RMW pumps fit most vertical engines (pump under the motor) with a 7/8" straight keyed shaft.
• RMW pumps have a standard 22mm-14 twist connect outlet.
• Best to choose RMW pump that has same or close to original pumps GPM & PSI. Significant changes to GPM may cause nozzle & motor problems.
|
6511.0004.00 - has a description of PUMP VRX 2022 V, L46
|
6511.0008.00 - has a description of PUMP VRX 2422 V L80
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
XJV2G15E-F8 AR (Annovi Reverberi) Pump 2 GPM @ 1450 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread
= 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545
(click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT
change oil. Use oil only to add if low. This oil is a specially formulated synthetic
with special additives for the demands of the XJ, SJ and BK pump series. No
other oil is factory approved for these pumps, and could result in pump failure.
This AR XJV2G15E-F8 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJV2G15E-F8 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
|
XJV3G20E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2000 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread
= 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545
(click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT
change oil. Use oil only to add if low. This oil is a specially formulated synthetic
with special additives for the demands of the XJ, SJ and BK pump series. No
other oil is factory approved for these pumps, and could result in pump failure.
This AR XJV3G20E-F8 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 5/8” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJV3G20E-F8 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
|
XJW24G24D-F27 AR (Annovi Reverberi) Pump 2.4 GPM @ 2400 PSI For parts just enter any part number on this breakdown in our search box for pricing and availability.
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread
= 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545
(click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT
change oil. Use oil only to add if low. This oil is a specially formulated synthetic
with special additives for the demands of the XJ, SJ and BK pump series. No
other oil is factory approved for these pumps, and could result in pump failure.
This AR XJW24G24D-F27 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJW24G24D-F27 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SJW3G25D-F27 AR (Annovi Reverberi) Pump 3 GPM @ 2500 PSI, D Version 7/8" Hollow Shaft
For parts just enter any part number on this breakdown in our search box for pricing and availability.
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread
= 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545
(click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT
change oil. Use oil only to add if low. This oil is a specially formulated synthetic
with special additives for the demands of the XJ, SJ and BK pump series. No
other oil is factory approved for these pumps, and could result in pump failure.
This AR SJW3G25D-F27 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The SJW3G25D-F27 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
|
XMA2.5G18E-F33 Pump from Annovi Reverberi. The XMA2.5G18E-F33 Pump is rated 2.5 GPM at a powerful 1800 PSI.
|
6501.0059.00 - has a description of PUMP AXD 2527 G-T
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6501.0050.00 - has a description of PUMP AXD 2524 G-T
|
XMV3G30D-F24 pump from Annovi Reverberi. The XMV3G30D-F24 is rated 3 gallons per minute at 3000 PSI. This pump is made to work on most pressure washers that run via either coupling, belt or gearbox drive. This unit spins at 3400 RPM.
|
4000PSI, 4.0GPM AR Direct Drive Pump with Unloader & Easy Start (RSV4G40B)
SKU: RSV4G40HDF40EZ
Brand: Annovi Reverberi - AR North America
This Annovi Reverberi / AR North America RSV4G40HDF40EZ series pump is designed to direct drive on gasoline engines ranging from 5 – 13 h.p. Intended use for medium to heavy tasks; this RSV4G40HDF40EZ triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance of 4 gpm at 4,000 psi. The RSV is a result of our combined 60 years of pumps building experience and expertise
• Triplex pump with Easy Start is smooth starting
• The RSV4G40HDF40EZ Features a compact and efficient intergraded unloader valve and fixed chemical injector
• Thermal relief valve included at no cost
• Built In easy start valve
• This RSV4G40HDF40EZ has Forged brass head & valve covers
• Ceramic coated stainless steel plungers
• Direct drive with 4 bolt gas mounting flange
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
XTA1G15E-F8 AR (Annovi Reverberi) Pump 1 GPM @ 1500 PSI
XTA1G15E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
|
XTA2G15EBA-F8 AR (Annovi Reverberi) Pump 2.11 GPM @ 1800 PSI
XTA2G15EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
|
XTV0.5G10E-F8 pump from Annovi Reverberi. This XTV0.5G10E-F8 is rated 0.5 GPM at 1000 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
XTA3G16EBA-F8 AR (Annovi Reverberi) Pump 3 GPM @ 1600 PSI
XTA3G16EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
|
6501.0008.00 - has a description of PUMP AXD 3522 G
|
XTA2G22E-F8 AR (Annovi Reverberi) Pump 2.11 GPM @ 2200 PSI
XTA2G22E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
|
|
|
