Home > Pressure Pumps > Replacement Pumps > Horizontal Engines > 1" Shaft > 9.5 HP >

AR Annovi Reverberi Pressure Washer Pump RSV3G35D-F40
AR Annovi Reverberi Pressure Washer Pump RSV3G35D-F40
AR Annovi Reverberi Pressure Washer Pump RSV3G35D-F40


 
Alternative Views:


Annovi Reverberi Pressure Washer Pump
List Price: $654.05
Our Price: $409.64
SHIPPING: Item Ships in 1 to 7 Days

Availability:: In Stock
Product Code: RSV3G35D-F40
Qty:

Description Technical Specifications Recommended Accessories / Additional Info
 
The RSV3G35D-F40 AR (Annovi Reverberi) Pressure Washer  Pump 3 GPM @ 3500 PSI, 1" Hollow Shaft - Great for most 6 to 9 HP Gas Engines with a straight shaft!
AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP

3.0 GPM    3500 PSI    INLET 3/8" FPT  OUTLET 3/8 MPT

1  SHAFT    GAS ENGINE FLANGE   BUILT IN UNLOADER VALVE

COVERED BY AR FIVE YEAR WARRANTY

RSV3G35D-F40 series are designed to direct drive on gasoline engines ranging from 5 13 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance of 4 gpm at 4,000 psi. The RSV3G35D-F40 series features a compact and efficient intergraded unloader valve and fixed chemical injector. The RSV3G35D-F40 is a result of our combined 60 years of pumps building experience and expertise.
Features
  • Manifold: New high efficiency design concept. (Patented). Forged brass for strength and no porposity for long life and higher hydrostatic pressures.
  • Bolts: Eight 6mm grade 8.8.
  • Plungers: Ceramic coated stainless steel.
  • Crankcase: Precision die-cast, cooling fins and anodized for maximum heat dissipation.
  • Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also
  • eliminates the crankshaft from floating.
  • Valves, Seats, and Springs: Stainless steel with specially designed Ultra FormTM cages to provide long life and positive seating.
  • Seals and V-Packings: V style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
  • Oil Seals: All are constructed of Buna-N rubber.
  • Plunger Rods: Stainless steel construction for strength (no plating to scrape off), o-ring plunger sealing system.
  • Connecting Rods: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

Accessories for this product...
1/2" PUMP GUARD - THERMAL RELIEF
Our Price: $7.90

Add
1/2" PUMP GUARD
5000 PSI PRESSURE GAUGE KIT
Our Price: $26.15

Add
5,000 PSI Max Pressure Gauge Kit
Annovi Reverberi Accessory - AR21039
Our Price: $84.03

Add
Annovi Reverberi Accessory - AR21039

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pressure Pumps > Replacement Pumps > Horizontal Engines > 1" Shaft > 9.5 HP
Pressure Pumps > ANNOVI REVERBERI > RS Series Pumps
Pressure Pumps > ANNOVI REVERBERI
Pressure Pumps > Replacement Pumps > Horizontal Engines > 1" Shaft
Pressure Pumps
Pressure Pumps > Replacement Pumps > Horizontal Engines
Pressure Pumps > Replacement Pumps