You are here: Home > Pressure Pumps > Replacement Pumps > Electric Motors > 5/8" Shaft > 4 HP
We found 3 results matching your criteria.

Pressure Pumps for 5/8" Electric Motors that require 4 hp to obtain maximum performance from your Pump and Motor Combination

Sort By:
Page of 1
AR Annovi Reverberi Pressure Washer Pump XJV3G20E-F8 COMET PUMP AXD 3020 E AR Annovi Reverberi Pressure Washer Pump XTA4G15EBA-F8
Annovi Reverberi Pump - XJV3G20E-F8
List Price: $500.00
Our Price: $259.90
6501.0013.00 - Comet Pumps AXD 3020 E
List Price: $628.87
Our Price: $328.02
AR Annovi Reverberi Pressure Washer Pump XTA4G15EBA-F8
List Price: $681.74
Our Price: $426.69
XJV3G20E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2000 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.

Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140 F, Inlet Thread = 1/2M, Discharge Thread = 3/8M

SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.

This AR XJV3G20E-F8 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 5/8 shaft 3.5 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJV3G20E-F8 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
6501.0013.00 - has a description of PUMP AXD 3020 E XTA4G15EBA-F8 AR (Annovi Reverberi) Pump 4 GPM @ 1500 PSI.

XTA4G15EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.