|
|
|
|
|
|
|
|
|
|
|
|
|
|
290 Pump from CAT Pumps. This 290 pump is rated 3.5 GPM at 1200 PSI.
|
CAT Pump 280 - 3 Frame Piston Pump, DS, 3.0/1000, 1330 RPM, BBCP/S-Valves. (Brass Model)
•The CAT Pump 280 has a Triplex UNIFLOW design provides a smooth, low-pulsation flow with strong suction capabilities.
•Hard chrome-plated 304S cylinders and sleeves provide long life with mild liquids within a range of 5-9 PH.
•Optional 316 Stainless Steel manifolds on the CAT Pump 280 are for added strength and corrosion resistance.
•Optional FPM and PTFE elastomers for liquid compatibility.
|
CAT Pump 430 - 4 Frame Piston Pump, DS, 5.0/1000, 1040 RPM, BBCP/S-Valves.
• The CAT Pump 430 has Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
• Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
• Mechanically actuated inlet valves give strong lift and easy prime on this CAT Pump 430.
• 304 stainless steel discharge valves for wear resistance.
• Oil bath crankcase assures optimum lubrication.
• 100% wetted seal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
333 Piston Pump from CAT Pumps. The 333 pump is rated 4 gallons per minute at 1200 PSI. This CAT Pump is a four frame piston style of pump that spins at 1070 RPM, where the cups and pistons are self lubricated and cooled by the pumps own pumping liquid.
|
CAT Pump 323 - 5 Frame Piston Pump, DS, 5.0/1500, 1000 RPM, BBCP/S-Valves.
The CAT Pump 323 has Superior Design
•Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
• Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
•Mechanically actuated inlet valves give strong lift and easy prime.
•Precision design 304 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
•Oil bath crankcase assures optimum lubrication.
•100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
This CAT Pump 323 uses Quality Materials
•Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
•Chrome plated, brass manifolds for strength and corrosion resistance.
•Special high strength TNM connecting rods offer superior bearing quality strength.
•Chrome-moly crankshaft gives unmatched strength and surface hardness.
•Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
The CAT Pump 323 has Easy Maintenance
•Stepped stainless steel piston rod with chrome-plated, stainless steel sleeve allows easy replacement from front of pump.
•All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
•Wear parts are available in convenient kits.
|
CAT Pump 390 - 5 Frame Piston Pump, DS, 12/600, 1200 RPM, BBCP/S-Valves.
The CAT Pump 390 has Superior Design
•Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
• Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
•Mechanically actuated inlet valves give strong lift and easy prime.
•Precision design 304 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life.
•Oil bath crankcase assures optimum lubrication.
•100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
This CAT Pump 390 uses Quality Materials
•Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
•Chrome plated, brass manifolds for strength and corrosion resistance.
•Special high strength TNM connecting rods offer superior bearing quality strength.
•Chrome-moly crankshaft gives unmatched strength and surface hardness.
•Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
The CAT Pump 390 has Easy Maintenance
•Stepped stainless steel piston rod with chrome-plated, stainless steel sleeve allows easy replacement from front of pump.
•All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
•Wear parts are available in convenient kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAT Pump 623 - 10 Frame Piston Pump, DS, 6.0/1200, 850 RPM, BBCP/S-Valves, Standard Brass Model.
CAT Pump 623 - 10 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 623 - 10 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 623 - 10 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
CAT Pump 820 - 10 Frame Piston Pump, DS, 10/1000, 940 RPM, BBCP/S-Valves, Standard Brass Model.
CAT Pump 820 - 10 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 820 - 10 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 820 - 10 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
CAT Pump 1010 - 10 Frame Piston Pump, DS, 13/700, 900 RPM, BBCP/S-Valves, Standard Brass Model.
CAT Pump 1010 - 10 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 1010 - 10 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 1010 - 10 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAT Pump 291 - 3 Frame Piston Pump, DS, 3.5/1200, 1200 RPM, SS/S-Valves. (Stainless Steel Model)
•The CAT Pump 291 has a Triplex UNIFLOW design provides a smooth, low-pulsation flow with strong suction capabilities.
•Hard chrome-plated 304S cylinders and sleeves provide long life with mild liquids within a range of 5-9 PH.
•Optional 316 Stainless Steel manifolds on the CAT Pump 291 are for added strength and corrosion resistance.
•Optional FPM and PTFE elastomers for liquid compatibility.
|
CAT Pump 281 - 3 Frame Piston Pump, DS, 3.0/1000, 1330 RPM, SS/S-Valves. (Stainless Steel Model)
•The CAT Pump 281 has a Triplex UNIFLOW design provides a smooth, low-pulsation flow with strong suction capabilities.
•Hard chrome-plated 304S cylinders and sleeves provide long life with mild liquids within a range of 5-9 PH.
•Optional 316 Stainless Steel manifolds on the CAT Pump 281 are for added strength and corrosion resistance.
•Optional FPM and PTFE elastomers for liquid compatibility.
|
CAT Pump 431 - 4 Frame Piston Pump, DS, 5.0/1000, 1040 RPM, SS/S-Valves.
• The CAT Pump 431 has Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
• Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
• Mechanically actuated inlet valves give strong lift and easy prime on this CAT Pump 431.
• 304 stainless steel discharge valves for wear resistance.
• Oil bath crankcase assures optimum lubrication.
• 100% wetted seal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAT Pump 331 - 4 Frame Piston Pump, DS, 4.0/1200, 1070 RPM, SS/S-Valves.
• The CAT Pump 331 has Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
• Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
• Mechanically actuated inlet valves give strong lift and easy prime on this CAT Pump 331.
• 304 stainless steel discharge valves for wear resistance.
• Oil bath crankcase assures optimum lubrication.
• 100% wetted seal
|
CAT Pump 621 - 10 Frame Piston Pump, DS, 6.0/1200, 850 RPM, SS/S-Valves, Stainless Steel Model.
CAT Pump 621 - 10 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 621 - 10 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 621 - 10 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
CAT Pump 821 - 10 Frame Piston Pump, DS, 10/1000, 940 RPM, SS/S-Valves, Stainless Steel Model.
CAT Pump 821 - 10 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 821 - 10 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 821 - 10 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAT Pump 1011 - 10 Frame Piston Pump, DS, 13/700, 900 RPM, SS/S-Valves, Stainless Steel Model.
CAT Pump 1011 - 10 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 1011 - 10 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 1011 - 10 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
CAT Pump 2520 - 25 Frame Piston Pump, DS, 25/800, 772 RPM, BBCP/S-Valves. (Standard Brass Models)
CAT Pump 2520 has Superior Design
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
304 stainless steel flat valve design offers positive seating and greater suction capabilities.
Oil bath crankcase assures optimum lubrication.
CAT Pump 2520 uses Quality Materials
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 2520 Easy Maintenance
Stepped stainless steel piston rod and with chrome-plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
CAT Pump 2520C - 25 Frame Piston Pump, DS, 25/800, 772 RPM, High-Temperature-210°F, Cooled Inlet, BBCP/S-Valves. (Hi-Temp Model)
CAT Pump 2520C has Superior Design
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
304 stainless steel flat valve design offers positive seating and greater suction capabilities.
Oil bath crankcase assures optimum lubrication.
CAT Pump 2520C uses Quality Materials
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 2520C Easy Maintenance
Stepped stainless steel piston rod and with chrome-plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAT Pump 2521 - 25 Frame Piston Pump, DS, 25/800, 772 RPM, SS/S-Valves.(Stainless Steel Models)
CAT Pump 2521 has Superior Design
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
304 stainless steel flat valve design offers positive seating and greater suction capabilities.
Oil bath crankcase assures optimum lubrication.
CAT Pump 2521 uses Quality Materials
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 2521 Easy Maintenance
Stepped stainless steel piston rod and with chrome-plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
CAT Pump 6020 - 60 Frame Piston Pump, DS, 60/1000, 500 RPM, BBCP/S-Valves.
CAT Pump 6020 - 60 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 6020 - 60 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 6020 - 60 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
CAT Pump 6040 - 60 Frame Piston Pump, DS, 40/1500, 500 RPM, BBCP/S-Valves.
CAT Pump 6040 - 60 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 6040 - 60 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 6040 - 60 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
|
|
|
|
|
|
|
|
|
|
|
CAT Pump 6041 - 60 Frame Piston Pump, DS, 40/1500, 500 RPM, SS/S-Valves.
CAT Pump 6041 - 60 Frame Piston Pump has Superior Design:
Triplex Uniflow design provides continuous forward liquid flow for smooth operation.
Wetted cups and floating pistons are lubricated and cooled by pumped liquid for long cup life.
Mechanically actuated inlet valves give strong lift and easy prime.
Oil bath crankcase assures optimum lubrication.
100% wetted seal design allows pumped liquid to cool and lubricate for longer life.
CAT Pump 6041 - 60 Frame Piston Pump uses Quality Materials:
Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance.
Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant.
Special high strength TNM connecting rods offer superior bearing quality strength.
Chrome-moly crankshaft gives unmatched strength and surface hardness.
Over sized crankshaft bearings with greater loading capacity mean longer bearing life.
CAT Pump 6041 - 60 Frame Piston Pump Easy Maintenance:
Stepped stainless steel piston rod with chrome plated, stainless steel sleeve allows easy replacement from front of pump.
All wet-end wear parts are easily serviced without entering crankcase, requiring less time and effort.
Wear parts are available in convenient kits.
|
|
|
|
|
