|
|
|
|
|
|
|
|
|
|
|
|
|
XMV3.5G30D-F24 AR (Annovi Reverberi) Pump 3.5 GPM @ 3000 PSI
XMV3.5G30D-F24 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XMV3.5G30D-F24 pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
|
XMA3.5G25N AR (Annovi Reverberi) Pump 3.5 GPM @ 2500 PSI
XMA3.5G25N Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XMA3.5G25N pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
|
XM15.15N AR (Annovi Reverberi) Pump 3.96 GPM @ 2200 PSI
XM15.15N Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XM15.15N pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
XMA3.5G22N AR (Annovi Reverberi) Pump 3.5 GPM @ 2200 PSI
XMA3.5G22N Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XMA3.5G22N pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
|
XMV3.5G25D-F25 Pump from Annovi Reverberi. The XMV3.5G25D-F25 is rated 3.5 gallons per minute at 2500 PSI. The unit spins at 3400 RPM and is created to mount to a gas or electric motor by either direct, belt or gearbox drive shafts.
|
XMV2.5G26D-F25 Pump From Annovi Reverberi. The XMV2.5G26D-F25 Pump is Rated 2.5 GPM at 2600 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
XMA2.5G18E-F33 Pump from Annovi Reverberi. The XMA2.5G18E-F33 Pump is rated 2.5 GPM at a powerful 1800 PSI.
|
XMV3.5G25D-F33 Pump from Annovi Reverberi. The XMV3.5G25D-F33 is rated 3.5 GPM at 2500 PSI. The unit spins at 3400 RPM and is constructed to mount to coupling, belt and gearbox drive systems, with either gas or electric motors.
|
XMA3.5G25E-F17 AR (Annovi Reverberi) Pump 3.5 GPM @ 2500 PSI.
XMA3.5G25E-F17 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XMA3.5G25E-F17 pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part # BAPL-6424 has a description of P.M.R. XMV3G27D-F25-20821 3.0GPM 2700PSI
|
Part # BAPL-6049 has a description of P.M.R. XMV3G27D-F25-VRT3-250 W/BYPASS &
|
In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi XMASS0.5G15E-F33 pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. S.S. Series XMASS0.5G15E-F33 feature a SAE 316 stainless steel manifold this is totally corrosion-resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anticorrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack under extreme variable temperature conditions.
|
|
|
|
|
|
|
|
|
|
|
|
|
In high frequency and long time operation, high accurate manufacturing technique is the only answer to the durable reputation Annovi Reverberi XMASS2.5G15E-F33 pumps. The S.S. Series uses include various applications such as reverse osmosis water desalination, seal gland flushing and waste water odor control. S.S. Series XMASS2.5G15E-F33 feature a SAE 316 stainless steel manifold this is totally corrosion-resistance. Special pumps features include our highly concentric bearing positioning on both sides of the crankcase, anticorrosion coated aluminum die cast crankcase, continuously lubricated Viton seals, triple lip loaded oils seals and our ultra thick ceramic plungers that will not crack under extreme variable temperature conditions.
|
|
|
