TS1711 GENERAL PUMP

Home > Pressure Pumps > GENERAL PUMP > T Series 47 >

Pressure Washer Repair Part - BAPL-2008

TS1711 3.5GPM 2700PSI SOLID SHAFT

List Price: $1,133.36

Our Price: $991.69

SHIPPING: Item Ships in 1 to 7 Days

Availability:: In Stock
Product Code: BAPL-2008

Qty:

Description

Technical Specifications

TS1711 GENERAL PUMP,T SERIES 47.

Need parts for this pump? Click here for the datasheet.

The following statement is intended to assist our customers in understanding the terms of General Pump's warranty, the circumstances under which they will honor claims, and the procedure for making such claims.
General PUmp/US warrants each pump to be free of defects in material or workmanship for a period of five (5) years from the date of shipment. In addition, Gernal Pump/US warrants allforged brass pump manifolds to be free of defects in material and workmanship and from damage resulting from freezing for the life of the pump. Liability on this warranty is on all non-wear parts and limited to the repair or replacement of any pump returned to General Pump/US which upon inpsection is judged to be defective due to workmanship or material failure.
In the course of marketing or servicing the customer or potential customer's needs, General Pump/US will use its best judgment in its recommendations. However, the ultimate responsibility for product application decisions shall rest with the customer. the sole and only warranty made by General Pump/US is the limited warranty described above. General Pump/US makes no other warranty or warranties of any kind, express or implied, including any implied warranty or merchantability or of any fitness for a particular use or purpose.General Pump/US disclaims and denies any liability for any direct, indirect, special, incidental or consequential damages which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight or other charges not expressly included herein. the only liability and the total liability of General Pump/US under this limited warranty or in any claim regarding or involving General Pump/US is expressly limited to the replacement of or purchase price of the product.
The following items are NOT warranted, due to matters beyond General Pump/US control.
Normal wear and tear to parts that are considered standard wear parts.
Defects caused by the fault or negligence of the buyer or third party.
Use of unauthorized repair parts, or;
modifications made by the customer.

Features

The preferred pump frame in the cleaning industry
Forged brass manifold with an exdlusive lifetime warranty
Large capacity, die cast, anodized aluminum oil bath crankcase
Over sized connecting rods for maximum life
Heavy duty tapered roller bearing
Solid ceramic plungers with continuously lubricating packings
Unitized stainless steel inlet and discharge valves
Available in left handed "L" version
Triplex Plunger Pump
Maximum Volume: 3.5 GPM
Maximum Discharge Pressure: 2700
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1450 RPM
Minimum Horsepower Requirements: 6.5 bhp (9.7 hp for gas engines)
Bore: .787" (20mm)
Stroke: .394" (10mm)
Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165 degrees F.
Inlet Port Thread: 1/2" FPT
Discharge Port Thread: 3/8" FPT
Shaft Diameter: .945" (24mm)
Dimensions: 12.2" x 9.2" x 6.9"
Weight: 32.0 lb.
Lubrication: Fill the crankcase to dot on the oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.

Share your knowledge of this product with other customers... Be the first to write a review

Quick Links

About Us

Contact Us