|
|
|
|
|
|
|
|
|
|
|
|
|
|
3218.0327.00 - has a description of MANIFOLD
|
Pressure Washer Repair Part - - 180101B - ORING
|
BAPL-2014 is an HPC liter bottle to be used with the foam nozzle. It has a maximum PSI of 3200 and a maximum temperature of 140 degrees. 1/4" FPT inlet. 5.3 GPM maximum.
Can produce thick foam under high pressure and has an adjustable air intake.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tank Lid 8" Closed
|
TPL046 TURBO NOZZLE 4000 PSI (25045)
|
7001.0003.00 - has a description of PUMP, DIAPHRAGM 4.0 GPM 60 PSI
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CAT Pumps - 8210 flex coupler assembly was designed for 145TC frame motors up to 3HP.
Selecting a compact direct drive coupler allows you to reduce space
requirements compared to belt or gearbox assemblies.
|
W/KEY,2HP,16.5X5/8"
|
AR / Annovi Reverberi Pump RPV2G19D is one of the most popular replacement pressure washer pumps on the market today for most pressure washers. The RPV2G19D Pump is rated GPM: 2 RPM: 3400 PSI: 1900 Shaft Size & Type: 3/4″ Hollow Shaft.
Parts Breakdown / repair manual here.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RPV2G19D-5/8 Annovi Reverberi AR Pump - THIS PUMP HAS A 5/8" GAS FLANGE.
|
This AR / Annovi Reverberi Diaphragm Pump Control Unit GR30 is Rated 10.6 gallons per minute at 360 maximum PSI. This is a new diaphragm pump from Annovi Reverberi.
|
Hypro Pumps - 4008-101-E65 - PMP 12V 55PSI
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RQW2.5G28-EZ Annovi Reverberi AR Pump
|
Pressure Washer Repair Part - Pressure Washer Part - AR1912-KIT
|
W/KEY,10HP,16.5X1-1/8"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Annovi Reverberi Pump RQW2.2G28-EZ - THE INLET AND OUT TUBES STICK OUT THE FRONT.
|
AR / Annovi Reverberi Pump RQW2.2G26D-EZ is one of the most popular replacement pressure washer pumps on the market today for most pressure washers. SPECIAL NOTE: THIS PUMP THE INLET AND OUT LET TUBES STICK OUT THE FRONT.
|
AR / Annovi Reverberi Pump RQW2.2G26D-EZ-SX is one of the most popular replacement pressure washer pumps on the market today for most pressure washers. SPECIAL NOTE: THIS PUMP IS A REAR MOUNT. THE INLET AND OUT TUBES STICK OUT THE BACK.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hypro Pumps - 8007-045-280 - MPU 12V 80 BP NVG 2.0S 1.2G 1MZT A
|
**REPLACED BY RQV25G26D-EZ**
|
Pressure Washer Part - RQW22G26-EZ
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pump: 25/2600 3400RPM
|
AR / Annovi Reverberi Pump RQV2.5G26D-EZ is one of the most popular replacement pressure washer pumps on the market today for most pressure washers. This Annovi Reverberi / AR North America RQV2.5G26D-EZ / RQV25G26D-EZ is a horizontal plunger pump for your pressure washer and is rated up to 2.5 GPM at 2,600 PSI, spins a 3/4" shaft at 3,400 RPM with a gas engine flange. The hollow shafted pump includes a built-in pressure control valve and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ)
|
RQW2.2G26-EZ Annovi Reverberi AR Pump
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RQW2.2G26-EZ-SX Annovi Reverberi AR Pump
|
**Pump: 22/2600
|
Pressure Washer Part - RQW25G26D-F7
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Annovi Reverberi Pump - RQW2.5G26D-F7
|
Pressure Washer Part - RMV22G24
|
Hypro Pumps - 2088-573-143 MPU 24V 30 SW PSS 3.5R 2.9G 1SZW A
SHURFLO® 2088 Series diaphragm pumps deliver reliable
performance in high flow, moderate pressure applications. They are used
in a variety of spraying and transfer applications that require flows of
up to 4.0 GPM [14.4 l/min]. They are available in a variety of
chemically resistant materials. They can be mounted in any position, and
are designed for easy maintenance. They are available in a variety of
voltages, from 12 VDC to 230 VAC.
|
|
|
