SILVER MEDAL™ is a clear liquid alkaline based aluminum brightener that quickly removes oxidation and restores dull,oxidized aluminum surfaces. SILVER MEDAL™ cuts caked on truck wheel grease, cleans restaurant hoods and ducts, is a great brushless painted commercial truck and building wash. It is USDA approved, biodegradable and safer to use than dangerous acid based brighteners. SILVER MEDAL™ has a powerful, penetrating action that removes greasy dirt found on motors and heavy equipment. When diluted, it is a brushless road film remover for painted commercial trucks. Ideal for use with hot or cold water, steam or high pressure washers. (Do not use on polished aluminum.)
CONCRETE OIL/STAIN REMOVER
Best results are obtained when product is drawn and applied under Hot high pressure. For
cold low pressure use, pre-soak soils with more concentrated product then pressure rinse.
HEAVY DEGREASING - DILUTE 20 to 1
Best results are obtained when product is drawn and applied under Hot high pressure. For cold low pressure use, pre-soak objects with more concentrated product then pressure rinse or steam clean.
BRUSHLESS VEHICLE WASHING - DILUTE 75 to 1
Draw and apply product through a high pressure washer. Apply from bottom to top. Let set. Rinse from top to bottom.
HOUSE CLEANING/BUILDING WASHING - DILUTE 30 to 1
Draw and apply product through a high pressure washer. Let set, Then high pressure rinse.
ALUMINUM BRIGHTNING - DILUTE 3 to 1
Apply product by spray, from bottom to top and let set. High pressure rinse from top to bottom. Repeat as needed. CAUTION: Makes bad aluminum look good, and highly polished aluminum look bad.
A/C ALUMINUM COIL CLEANING - DILUTE 5 to 1
Pre-spray straight or diluted product through a trigger or pump up sprayer. Let set, then
low pressure rinse.
RESTAURANT HOOD & DUCT CLEANING - DILUTE 10 to 1
Pre-spray all greasy surfaces with very concentrated product. Then let set. Wipe or pressure rinse. (Hot if available.)
SILVER MEDAL CONCENTRATE INDUSTRIAL CLEANING COMPOUND, AKLINE ALUM BRIGHT 1 GAL JUG *803