DIRECTIONS: Dissolve with water as follows:
Aqueous parts spray cabinets, hot or cold dip tanks: depending on soil load, 2-8 net wt. ounces of SLAM DUNK™ per gallon capacity of washer.
To make a liquid Detergent: “Ready to use SLAM DUNK™”: dissolve 2- 8 net wt. ounces of SLAM DUNK™ per gallon.
“Concentrated liquid SLAM DUNK™”: dissolve up to 1 pound of SLAM DUNK™ into 1 gallon of hot water. This solution can be diluted again up to 10 to 1.
HIGH PRESSURE WASHING: Dissolve the proper amount of SLAM DUNK™ into warm water to create a “ready to use” liquid or make a “concentrated liquid” to be diluted prior to using. Apply to soiled items or draw liquified SLAM DUNK™ into a high pressure washer.
PARTS,CLNR SLAMDUNK 50# PARTS WASHER & DIPTANK ALKALINE POWDER ADD 2 8oz/GAL W/RUST INHIBITORS *858
KEEP OUT OF REACH OF CHILDREN
FIRST AID: If taken internally, drink large amounts of water. Do not induce vomiting. Give 1 oz. of vinegar in an equal amount of water. Seek medical attention. If contact with skin flush with water for 15 minutes. Seek medical attention if irritation develops. If contact with eyes flush with water for 15 minutes. Seek medical attention. Inhalation: move person to fresh air. Call Physician immediately.
CONTACT CUSTOMER SERVICE AT: 610-583-7657
Proudly made in the U. .A.
Regulatory & liability information: The user assumes full responsibility in testing and usage. In no event shall ETS Co. be held liable for consequential or incidental damage exceeding the cost of this product. This product should be in no way used other than stated in the instructions on this product.
FOR CHEMICAL EMERGENCY CONTACT CHEM TEL INC. 1-800-255-3924
SLAMDUNK™ is available in 50, 100, and 450 pound containers.