content top





Join our mailing list!

  Home > Pressure Pumps > HYPRO >

  HYPRO 2535S 38 GPM CARWASH TRIPLEX PLUNGER PUMP
 
 
List Price: $5,759.00
Our Price: $3,678.19
You save $2,080.81!


Availability:: Usually Ships in 2 to 3 Days
Product Code: HYWP-2535S
Qty:

Description
 
The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.
 
Features
  • Performance Information
  • Max. flow: 38 gpm/144 lpm
  • Max. pressure: 1200 psi/83 bar
  • Max. rated speed: 800 rpm
  • Other Attributes
  • Ports: 1/2" inlet, 3/8" outlet
  • Shaft: 3/4" OD solid thru shaft for left- or right-hand operation
  • Head and manifold material: 316 stainless steel head and two-piece manifold resist washout and corrosion
  • Oversized crankshaft, bearings and bronze connecting rod can handle the abuse of cold start-ups and intermittent operation
  • Plunger rod: Stepped plunger rod between plunger guide and oil seal eliminates seal failure due to plunger rod wear
  • V-packings: Self-adjusting, spring-loaded, double V-packings maintain constant high pressure seal compression and extend seal and plunger life
  • Servicing: Innovative cartridge design allows for easy service access by bringing all of the maintenance toward the front
  • Easily replaces Cat 3535 and General 1541 pumps
  • Rails: Sold separately (Part # 1510-0110)
  • Weight: 141 lbs./64.0 kg
  • LETTER CODES:
  • K = NO BASE
  • L = LEFT HAND SHAFT EXTENSION
  • W = VITON SEALS
  • U2 = 1500 PSI / UNLOADER SYSTEM
  • U3 = 3000 PSI / UNLOADER SYSTEM
  • G1 = 1.8:1 GEARBOX FOR 8-18HP ENGINES, 1" SOLID SHAFT
  • G2 = 1.8:1 GEARBOX FOR 10-18HP ENGINES, 1 1/8" SOLID SHAFT
  • G3 = GEAR REDUCTION ASSEMBLY
  • T = DISABLER VALVES
  • C = DIRECT COUPLE TO GASOLINE ENGINES
  • H = PUMPS WI TH TORQUE ARM
  • P = PUMPS WITH RAIL MOUNTING KIT
  • B = BRASS HEAD
  • A (FOUND AFTER THE DASH IN MODEL NUMBER) = DIRECT COUPLE TO ELECTRIC MOTORS (NEMA 56C), EXAMPLE: 2220B-AP
  • A (WHEN SUBSTITUTED FOR THE LETTER B) = ALUMINUM HEAD INSTEAD OF BRASS HEAD, EXAMPLE: 2220A-AP

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pressure Pumps > HYPRO
Pressure Pumps


PORTABLE GENERATOR MNBE-VI-3000 $598.00
CRANKSHAFT 24MM $136.55
25 FT. NON-MARKING HOSE HIGH PRESSURE (5400 PSI MAX) $66.00
5PFR1 Ceramic Plunger, CS, 4.0/1800, 1725 RPM, SS/SS-Valves $4,016.00
T731B DUPLEX 3GPM 1200PSI SOLID SHAFT $342.06
WATER LANCE 36 1/4 M X M $6.80
CLEAR,OUT LIQD 1 GAL $9.70
KIT 8HP, V-PACKING, 20 x $43.09
SJV3G27D-F7 3 GPM @ 2700 PSI - 3/4" Hollow Shaft $234.60