2SF Plunger, 3.0/2500, 3450 RPM, Gas 3/4" shaft w/7500XS Unloader, By-Pass Hose, Oil, BB/S-Valves

JUST REMOVE YOUR OLD 3/4 IN. GAS ENGINE FLANGE PUMP AND BOLT THIS ONE ON!

IDEAL FOR 5.5 & 6.5 HP ENGINES, AND DON'T FORGET FREE SHIPPING! (WITHIN CONTINENTAL UNITED STATES.

Need parts for this pump? Click here for the datasheet.

Click here for servicing instructions.

• UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
• Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
• Ultimate portability, less than 11 pounds, less than 10" long.
• Regulating unloader is standard on each pump to assure system pressure control and pump protection
• Plunger Pump
• Direct Drive
• Maximum Volume: 3.0 GPM
• Maximum Discharge Pressure: 2000 PSI
• Maximum Inlet Pressure: 75 PSI
• Maximum Pump Speed: 3450 RPM
• Minimum Horsepower Requirements: 3.0 bhp
• Bore: .708" (18mm)
• Stroke: .177" (4.5mm)
• Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
• Maximum Fluid Temperature: 160 Degrees F.
• Inlet Port: 3/8" FPT
• Discharge Ports: Dual 3/8" FPT
• By-pass Port: 1/4" FPT
• Dimensions: 9.13" x 6.65" x 6.50"
• Weight: 11.83 lbs