This surface cleaner connects to a pressure washer and uses two nozzles rotating on a solid spray bar at a high RPM within 1” of the ground. It will clean concrete up to 10 times the speed of an operator using a wand, and, with more consistency and less operator fatigue. Simply move over the surface and watch a clean path appear behind the unit. The unit cleans a 19” swath at pressures up to 4,000 PSI. It also can handle temperatures up to 200º F. This surface cleaner is constructed with a stainless steel outer shell and a urethane inner shell on a four wheeled carriage . The heavy duty handle has a cleaning wand holster. This surface cleaner has a triple vacuum intake tubes to remove 85-95% of dirty wash water during your cleaning process. Shipping weight is 39 Lbs.

• Vacuum Reclaim System Features:
• Vacuum including 2 each 13.5 amp 110 volt hi volume, 3 stage vacuum motors
• 30 gallon, DOT approved waste tank with 1” drain plug
• Slide-out debris filter and overflow float ball
• System is GFI (ground fault interrupt) protected
• 170” water lift capacity for rapid de-watering
• Cart frame for portability convenience on all terrain
• Auto pump out system for waste / recovery tank (automatically pumps out wash water while vacuum runs)
• Vacuum hose super duty PVC with spiral reinforcement
• 50’ x 2” abrasion and chemical resistant with quick-connect
• VacuBerm™ 4ft. scuff resistant PVC for wash water control
• Portable 3000 Watt Generator Features:
• .5 HP Honda gasoline engine with Low oil shutdown
• Brushless 120V alternator
• Fuel shutoff valve
• Angled isolator design features four (4) neoprene isolators
• USFS-approved spark arrestors
• Meets CARB and EPA emission standards
• Low profile, compact design
• Meets CARB and EPA emission standards
• Large low-tone mufflers with industrial air cleaners to reduce noise to lowest levels possible
• Heavy-duty wraparound frame with 1 inch powder coated steel tubing
• Easy-access and protected control panel with magnetic circuit breaker and GFCI