You are here: Home > Pressure Pumps > Replacement Pumps > Electric Motors
We found 38 results matching your criteria.

Replacement Pressure Pump Specials for Electric Motors that require between 1/3 and 11 1/2 hp

Select your  flange size above
Sort By:
Page of 2
AR Annovi Reverberi Pressure Washer Pump XJV2G15E-F8 AR Annovi Reverberi Pressure Washer Pump XJV3G20E-F8 COMET PUMP AXD 3020 E
Annovi Reverberi Pump - XJV2G15E-F8
List Price: $495.00
Our Price: $254.40
Annovi Reverberi Pump - XJV3G20E-F8
List Price: $495.00
Our Price: $254.40
Comet Pumps - 6501.0013.00 PUMP AXD 3020 E
List Price: $610.00
Our Price: $308.41
XJV2G15E-F8 AR (Annovi Reverberi) Pump 2 GPM @ 1450 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.

Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140 F, Inlet Thread = 1/2M, Discharge Thread = 3/8M

SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.

This AR XJV2G15E-F8 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4 shaft 3.5 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJV2G15E-F8 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
XJV3G20E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2000 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.

Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140 F, Inlet Thread = 1/2M, Discharge Thread = 3/8M

SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.

This AR XJV3G20E-F8 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 5/8 shaft 3.5 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJV3G20E-F8 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
COMET PUMP AXD 3020 E PART NO. 6501.0013.00, 3.0 GPM @ 2000 PSI @ 3400 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts. Click here.
COMET PUMP AXD 2520 E COMET PUMP AXD 2020 E AR Annovi Reverberi Pressure Washer Pump XMA2G22E-F33
Comet Pumps - 6501.0012.00 PUMP AXD 2520 E
List Price: $610.00
Our Price: $308.41
Comet Pumps - 6501.0010.00 PUMP AXD 2020 E
List Price: $610.00
Our Price: $308.41
Annovi Reverberi Pump - XMA2G22E-F33
List Price: $605.00
Our Price: $309.38
COMET PUMP AXD 2520 E PART NO. 6501.0012.00, 2.5 GPM @ 2000 PSI @ 3400 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts. Click here. COMET PUMP AXD 2020 E PART NO. 6501.0010.00, 1.9 GPM @ 2000 PSI @ 3400 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts. Click here. XMA2G22E-F33 AR (Annovi Reverberi) Pump 2.11 GPM @ 2200 PSI

XMA2G22E-F33 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XMA2G22E-F33 pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
XMA2.5G18E-F33 Pump from Annovi Reverberi AR Annovi Reverberi Pressure Washer Pump XMA3G18E-F33 AR Annovi Reverberi Pressure Washer Pump XTA1G15E-F8
XMA2.5G18E-F33 Pump from Annovi Reverberi
List Price: $605.00
Our Price: $309.38
Annovi Reverberi Pump - XMA3G18E-F33
List Price: $605.00
Our Price: $309.38
Annovi Reverberi Pump - XTA1G15E-F8
List Price: $635.00
Our Price: $324.37
XMA2.5G18E-F33 Pump from Annovi Reverberi.  The XMA2.5G18E-F33 Pump is rated 2.5 GPM at a powerful 1800 PSI. XMA3G18E-F33 AR (Annovi Reverberi) Pump 3 GPM @ 1800 PSI

XMA3G18E-F33 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XMA3G18E-F33 pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
XTA1G15E-F8 AR (Annovi Reverberi) Pump 1 GPM @ 1500 PSI

XTA1G15E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
AR Annovi Reverberi Pressure Washer Pump XTA2G15EBA-F8 AR Annovi Reverberi Pressure Washer Pump XTA0.5G10EBA-F8 XTV0.5G10E-F8 pump from Annovi Reverberi
Annovi Reverberi Pump - XTA2G15EBA-F8
List Price: $635.00
Our Price: $324.37
Annovi Reverberi Pump - XTA0.5G10EBA-F8
List Price: $645.00
Our Price: $329.37
XTV0.5G10E-F8 pump from Annovi Reverberi
List Price: $645.00
Our Price: $329.37
XTA2G15EBA-F8 AR (Annovi Reverberi) Pump 2.11 GPM @ 1800 PSI XTA2G15EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
XTA0.5G10EBA-F8 AR (Annovi Reverberi) Pump 0.5 GPM @ 1000 PSI

XTA0.5G10EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
XTV0.5G10E-F8 pump from Annovi Reverberi.  This XTV0.5G10E-F8 is rated 0.5 GPM at 1000 PSI.
AR Annovi Reverberi Pressure Washer Pump XMA3G30E-F17 AR Annovi Reverberi Pressure Washer Pump XMA3.5G25E-F17 AR Annovi Reverberi Pressure Washer Pump XTA3G16EBA-F8
Annovi Reverberi Pump - XMA3G30E-F17
List Price: $645.00
Our Price: $329.37
Annovi Reverberi Pump - XMA3.5G25E-F17
List Price: $645.00
Our Price: $329.37
Annovi Reverberi Pump - XTA3G16EBA-F8
List Price: $655.00
Our Price: $334.37
XMA3G30E-F17 AR (Annovi Reverberi) Pump 3 GPM @ 3000 PSI.

XMA3G30E-F17 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XMA3G30E-F17 pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
XMA3.5G25E-F17 AR (Annovi Reverberi) Pump 3.5 GPM @ 2500 PSI.

XMA3.5G25E-F17 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These XMA3.5G25E-F17 pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
XTA3G16EBA-F8 AR (Annovi Reverberi) Pump 3 GPM @ 1600 PSI

XTA3G16EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
AR Annovi Reverberi Pressure Washer Pump XTA2G22E-F8 XTV3G22E-F8 pump from Annovi Reverberi COMET PUMP AXD 4030 G
Annovi Reverberi Pump - XTA2G22E-F8
List Price: $675.00
Our Price: $344.36
XTV3G22E-F8 pump from Annovi Reverberi
List Price: $675.00
Our Price: $344.37
Comet Pumps - 6501.0023.00 PUMP AXD 4030 G
List Price: $685.00
Our Price: $345.35
XTA2G22E-F8 AR (Annovi Reverberi) Pump 2.11 GPM @ 2200 PSI

XTA2G22E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
XTV3G22E-F8 pump from Annovi Reverberi. The XTV3G22E-F8 is rated 3 Gallons per Minute at 2200 PSI and 3400 RPM.
COMET PUMP AXD 4030 G PART NO. 6501.0023.00, 4.0 GPM @ 3000 PSI @ 3400 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts. Click here.
COMET PUMP LWD 2020 E COMET PUMP LWS 3020 E COMET PUMP LWS 2020 E
Comet Pumps - 6303.0105.00 PUMP LWD 2020 E
List Price: $695.00
Our Price: $350.27
Comet Pumps - 6301.0604.00 PUMP LWS 3020 E
List Price: $700.00
Our Price: $352.74
Comet Pumps - 6301.0102.00 PUMP LWS 2020 E
List Price: $700.00
Our Price: $352.74
COMET PUMP LWD 2020 E PART NO. 6303.0105.00 5/8" HOLLOW SHAFT COMET PUMP LWS 3020 E PART NO. 6301.0604.00, 3.0 GPM @ 2000 PSI @ 1750 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts. Click here. COMET PUMP LWS 2020 E PART NO. 6301.0102.00, 2.0 GPM @ 2000 PSI @ 1750 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts. Click here.
AR Annovi Reverberi Pressure Washer Pump XTA3G22E-F8 AR Annovi Reverberi Pressure Washer Pump SXMA3G35E-F17 AR Annovi Reverberi Pressure Washer Pump SXMA4G30E-F17
Annovi Reverberi Pump - XTA3G22E-F8
List Price: $695.00
Our Price: $354.36
Annovi Reverberi Pump - SXMA3G35E-F17
List Price: $695.00
Our Price: $354.36
Annovi Reverberi Pump - SXMA4G30E-F17
List Price: $695.00
Our Price: $354.36
XTA3G22E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2200 PSI @ 1750 RPM, XTA1750rpm.

XTA3G22E-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. The XTA3G22E-F8 has One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
SXMA3G35E-F17 AR (Annovi Reverberi) Pump 3 GPM @ 3500 PSI.

SXMA3G35E-F17 Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass heads with a bayonet style sight glass in the rear and side covers. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium SKF tapered roller bearings and the precision die-cast supports assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material oversized for maximum strength and load disbursement. Spinning at 1750 RPM, this SXMA3G35E-F17 pump was designed to deliver 3GPM at 3500 PSI.
AR Annovi Reverberi Pressure Washer Pump SXMA4G30E-F17 4 GPM @ 3000 PSI

SXMA4G30E-F17 Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass heads with a bayonet style sight glass in the rear and side covers. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium SKF tapered roller bearings and the precision die-cast supports assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material oversized for maximum strength and load disbursement. Spinning at 1750 RPM, this SXMA4G30E-F17 pump was designed to deliver 4 GPM at 4000 PSI.
AR Annovi Reverberi Pressure Washer Pump XTA2G15NBA AR Annovi Reverberi Pressure Washer Pump XMA2G15E-F33
XTA2G15EBA-F8 2.1GPM 1800PSI 1750RPM 5/8
List Price: $474.56
Our Price: $365.17
AR Annovi Reverberi Pressure Washer Pump XTA2G15NBA
List Price: $584.35
Our Price: $366.73
AR Annovi Reverberi Pressure Washer Pump XMA2G15E-F33
List Price: $587.10
Our Price: $368.42
XTA2G15EBA-F8 2.1GPM 1800PSI 1750RPM 5/8 Replacement XTA2G20N XMA2G15E-F33 AR (Annovi Reverberi) Pump 2.11 GPM @ 1500 PSI

XMA2G15E-F33 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. TheseXMA2G15E-F33 pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
COMET PUMP ZWD 3530 G
XTV3G16E-F8 3GPM 1600PSI 3400RPM 5/8" SH
List Price: $480.94
Our Price: $370.08
XTA3G16EBA-F8 3GPM 1600PSI 1750RPM 5/8"
List Price: $496.10
Our Price: $381.75
Comet Pumps - 6305.1700.00 PUMP ZWD 3535 G
List Price: $790.00
Our Price: $397.06
XTV3G16E-F8 3GPM 1600PSI 3400RPM 5/8" SH XTA3G16EBA-F8 3GPM 1600PSI 1750RPM 5/8" COMET PUMP ZWD 3530 G PART NO. 6305.0400.00, 3.5 GPM @ 3000 PSI @ 3400 RPM