XJW24G24D-F27 AR (Annovi Reverberi) Pump 2.4 GPM @ 2400 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread
= 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545
(click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT
change oil. Use oil only to add if low. This oil is a specially formulated synthetic
with special additives for the demands of the XJ, SJ and BK pump series. No
other oil is factory approved for these pumps, and could result in pump failure.
This AR XJW24G24D-F27 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJW24G24D-F27 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.