You are here: Home > Pressure Pumps > Replacement Pumps > Electric Motors > 5/8" Shaft > 2 HP
We found 8 results matching your criteria.

Pressure Pumps for 5/8" Electric Motors that require 2 hp to obtain maximum performance from your Pump and Motor Combination

Sort By:
Page of 1
AR Annovi Reverberi Pressure Washer Pump XJV2G15E-F8 AR Annovi Reverberi Pressure Washer Pump XTA2G15EBA-F8 COMET PUMP LWD 2020 E
Annovi Reverberi Pump - XJV2G15E-F8
List Price: $495.00
Our Price: $254.40
Annovi Reverberi Pump - XTA2G15EBA-F8
List Price: $635.00
Our Price: $324.37
Comet Pumps - 6303.0105.00 PUMP LWD 2020 E
List Price: $695.00
Our Price: $350.27
XJV2G15E-F8 AR (Annovi Reverberi) Pump 2 GPM @ 1450 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.

Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140 F, Inlet Thread = 1/2M, Discharge Thread = 3/8M

SPECIAL NOTE: Use only AR64545 (click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.

This AR XJV2G15E-F8 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4 shaft 3.5 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJV2G15E-F8 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
XTA2G15EBA-F8 AR (Annovi Reverberi) Pump 2.11 GPM @ 1800 PSI XTA2G15EBA-F8 Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
COMET PUMP LWD 2020 E PART NO. 6303.0105.00 5/8" HOLLOW SHAFT
COMET PUMP LWS 2020 E AR Annovi Reverberi Pressure Washer Pump XTA2G15NBA
Comet Pumps - 6301.0102.00 PUMP LWS 2020 E
List Price: $700.00
Our Price: $352.74
XTA2G15EBA-F8 2.1GPM 1800PSI 1750RPM 5/8
List Price: $474.56
Our Price: $365.17
AR Annovi Reverberi Pressure Washer Pump XTA2G15NBA
List Price: $584.35
Our Price: $366.73
COMET PUMP LWS 2020 E PART NO. 6301.0102.00, 2.0 GPM @ 2000 PSI @ 1750 RPM, See product spec sheet for detailed specifications, repair kits and replacement parts. Click here. XTA2G15EBA-F8 2.1GPM 1800PSI 1750RPM 5/8 Replacement XTA2G20N
AR Annovi Reverberi Pressure Washer Pump XMA2G15E-F33 XTA2G15EBA-VR54 Pump and VR54 Unloader
AR Annovi Reverberi Pressure Washer Pump XMA2G15E-F33
List Price: $587.10
Our Price: $368.42
P.M.R. XTA2G15EBA-VR54 BYPASS & THERMAL
List Price: $568.22
Our Price: $437.25
XMA2G15E-F33 AR (Annovi Reverberi) Pump 2.11 GPM @ 1500 PSI

XMA2G15E-F33 Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. TheseXMA2G15E-F33 pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
P.M.R. XTA2G15EBA-VR54 BYPASS & THERMAL