View CartMy Account / Order StatusHelp


Join our mailing list!



(Your shopping cart is empty)

  Home > Cleaning Chemicals > Alkaline products >

  PAINT STRIPPER 606 MULTI LAYER 5 GAL
  PAINT STRIPPER 606 MULTI LAYER 5 GAL
 
List Price: $152.82
Our Price: $152.82
Non-Standard Packaging+HazMat Fee $26.00


Availability: Usually Ships in 24 Hours
Product Code: CPCP-578050
Qty:

Description
 
Diedrich 606/606X Paint Removers are thixotropic alkaline compounds blended with special wetting agents and surfactants designed to remove oil base, latex, and lead based paints from exterior surfaces under normal conditions. Whitewash, limewash, cement-based paints, aggregate sand masonry waterproofing paints, blood and milk paints are difficult and may not be affected by the 606/606X. A TEST SAMPLE IS A MUST. 606/606X can be used to remove paint from brick, stone, concrete, block, metal and wood surfaces, followed by the appropriate Diedrich Neutralizer. 606 can also be used for graffiti removal from brick, stone, block and concrete surfaces. 606/606X may also remove "vine stains" from masonry where vines and foliage had been allowed to grow.

DIRECTIONS:

MASONRY, STONE, CONCRETE, METAL:
Apply 606/606X with a synthetic fiber brush or roller, and for best results, a stainless steel corrosion-resistant airless sprayer fitted with viton, teflon or other caustic resistant seals and hoses (set at lowest possible setting to reduce/prevent atomization of the stripper), liberally and uniformly. Apply full strength and let stand as long as necessary to soften whatever number of coats may be on the surface.

The time may range from 1-24 hours with approximately 1 hour allowed for each layer of paint (Example: dissolve time for 4 coats of paint - allow 4 hours dwell time or overnight.) If 606/606X begins to dry out during dwell time, mist with water to reactivate. Where there are many coats of paint, additional applications of 606/606X may be necessary. IF APPLICATION IS TOO THIN OR UNEVEN, OR REMOVAL ATTEMPT IS TOO RUSHED, ADDITIONAL APPLICATIONS MAY BE NECESSARY.

To rinse, fog lightly with a water mist, wait 10 minutes, then rinse with as much concentrated water pressure as possible. For best results a pressure of 500 PSI is recommended. It is not necessary to let the surface dry out completely before reapplication. 606/606X may cause a chalk film on masonry. To remove, apply 101 Masonry Restorer 5 to 1 according to directions. Failure to neutralize may interfere with performance of clear sealers or future paint coatings.

PAINT STRIPER 606 DIEDRICH MULTI LAYER ALK 5 GAL *860
 
Features
  • Diedrich 606/606X offer a sensible alternative to damaging sandblasting with these advantages:

  • RETAINS the original outer masonry "skin' for natural waterproofing and color appearance.
  • KEEPS mortar joints intact and structurally sound, thus avoiding costly and unnecessary tuckpointing.
  • PRESERVES delicate architectural carvings and delicate moldings.
  • WATER-SOLUBLE AND BIODEGRADABLE formulas create no ecological problems of sand nuisance and dust pollution.
  • DOES NOT contain waxes or heavy metals.



 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Cleaning Chemicals > Alkaline products
Cleaning Chemicals > Building and House
Cleaning Chemicals > Concrete Floor Cleaners
Graffiti Removers
Cleaning Chemicals > Masonry Cleaner
Cleaning Chemicals > Paint Stripping
Cleaning Chemicals > Specialty Industrial Products
Cleaning Chemicals > Wood Cleaning
Cleaning Chemicals
ETS Co. Inc.
20 E. Winona Ave.
Norwood, PA 19074
 About Us
     Privacy Policy
 Send Us Feedback
 
Company Info | Product Index | Category Index | Help | Terms of Use
Copyright © 2008 Equipment Trade Service Co. Inc.. All Rights Reserved.
Shopping Cart Software by Volusion

Please Note: All damaged pressure washers or pumps should be taken to an authorized service center to be examined by a factory-trained professional. Any repairs or disassembly conducted by untrained or unauthorized persons may result in machine damage and/or personal injury and will void your new machine warranty. Product improvements, part substitutions, manuals and parts lists are updated frequently at the factory and subject to change without notice. ETS Co. Inc. shall not be responsible for any damage caused by, use of products, improper installation of products, injury to personnel, lost income due to damages. Please call us at 1-877-824-7763 with any questions.